MCM02005P01K is an NSK Monocarrier MCM model (lightweight type) all-in-one single-axis actuator: size MCM02, nominal stroke 50 mm, ball screw lead 1 mm (shaft dia. 6 mm), accuracy grade Precision grade (P), single slider (K). The unit integrates an NSK ball screw, linear guide and support bearing into one body, fully assembled, adjusted and lubricated at the factory (NSK K1 lubrication units built in) — just mount a motor and run. The MCM model has a lightweight, compact cross-section suited to small and medium handling and positioning axes; This grade offers repeatability ±0.003 mm, backlash 0.003 mm or less, positioning accuracy 0.020 mm. Basic load ratings: Ca 480 N / C0a 615 N (ball screw). The official NSK Monocarrier catalog PDF with dimension drawings is attached below.
Reference number breakdown: MC = Monocarrier, M = MCM lightweight model, 02 = size, 005 = stroke code (×10 mm), P = accuracy grade, 01 = 1 mm lead, K = single slider — per NSK catalog CAT. No. E3162p "Reference Number Coding".
Other configurations of this size
The MCM02 with 1 mm lead is also available in these strokes: MCM02010P01K, MCM02015P01K.
Other leads with the same stroke (50 mm): MCM02005P02K.
Also available in high grade (H): MCM02005H01K.
Sizing and integration support
Monocarrier eliminates separate sizing, assembly and alignment of ball screws and linear guides — with the factory motor bracket, simply bolt on a stepping or servo motor and run. Add your load, stroke, speed and accuracy requirements to the inquiry form; Nahshon works directly with NSK to confirm sizing, quotation and lead time.
