L
o
a
d
i
n
g
.
.
.
NSK Banner
Product Series of Automation-Related Precision Ball Screws and Linear Rails – High-Precision Ball Screws
NSKBearingsInch Series Tapered Roller Bearings15100/15250X
Product Overview
L
o
a
d
i
n
g
.
.
.
Product image_1
Inch Series Tapered Roller Bearings/Bearings

15100/15250X

Inch Series Tapered Roller Bearing

NSK Distributor Taiwan

Product Features

  • NSK inch series tapered roller bearing set 15100/15250X (cone 15100 / cup 15250X): 25.4 mm bore, 63.5 mm outer diameter, 20.638 mm width
  • Basic dynamic load rating Cr 56500 N, basic static load rating C0r 53000 N (NSK official catalog CAT. No. E1103d)
  • Limiting speed approx. 6000 min⁻¹ (grease), 8000 min⁻¹ (oil)
  • Inch series tapered roller bearings supply cone (inner ring assembly) and cup (outer ring) separately and interchangeably — commonly used in agricultural and construction machinery and conveying equipment, cross-compatible with Timken-style designations

Quantity

Quick Inquiry

Call UsEmail UsContact Us About This Product
Product Description

15100/15250X is an NSK inch series tapered roller bearing set: cone (inner ring assembly) 15100 and cup (outer ring) 15250X, 25.4 mm bore, 63.5 mm outer diameter, 20.638 mm width. Basic dynamic load rating Cr is 56500 N and basic static load rating C0r is 53000 N (NSK official catalog CAT. No. E1103d). Cone and cup are supplied and replaceable separately, with a dimension system compatible with Timken-style designations — commonly used in agricultural machinery, construction equipment and conveying systems requiring combined radial and unidirectional axial load capacity.

For current spec and catalog cross-reference, please inquire: Nahshon is NSK's distributor in Taiwan with full part-number lookup and sourcing support — add the part number to your inquiry list and we will confirm the current code, spec and quote with the factory; sourcing support is also available for discontinued models.

FAQ
What's the difference between the Z, ZZ and DDU suffixes?
Z means a single-side steel shield, ZZ means steel shields on both sides, and DDU means contact rubber seals on both sides. Shields suit general environments and high speeds; rubber seals give better dust and water protection with slightly higher friction torque — choose based on your dust exposure and lubrication method.
When should I choose C3 clearance instead of standard clearance?
For motors or other applications with noticeable temperature rise, or high-speed operation, the inner ring expands from heat and reduces the clearance — choose C3 in that case. Standard clearance is fine for general room-temperature, low-speed use. See Nahshon's technical resources for a clearance selection guide.
Is 15100/15250X in stock in Taiwan? What is the lead time?
Nahshon is the NSK distributor in Taiwan and keeps stock of some commonly used items. Add 15100/15250X to your inquiry list or give us a call, and we'll confirm stock, lead time and quote.
Nahshon Logo

Copyright©2026 NAHSHON ENTERPRISE .All Rights Reserved.

Design by Sowing