L
o
a
d
i
n
g
.
.
.

Product Series of Automation-Related Precision Ball Screws and Linear Rails – High-Precision Ball Screws

Product Overview

L
o
a
d
i
n
g
.
.
.

Thrust Bearings/Bearings

51216

Thrust Ball Bearing

NSK Distributor Taiwan

Height T28 mm

Product Features

NSK thrust ball bearing, single-direction 51216 series, model 51216: 80 mm shaft-washer bore, 115 mm housing-washer OD, 28 mm height, flat seat
Basic dynamic load rating Ca 79 kN, basic static load rating C0a 218 kN (NSK official catalog CAT. No. E1103d)
Limiting speed approx. 1800 min⁻¹ (grease), 2600 min⁻¹ (oil)
Carries pure axial load in one direction only — no radial capacity; shaft washer and housing washer must not be reversed
Nahshon is NSK's distributor in Taiwan — add the part number to your inquiry list

Quantity

Quick Inquiry

Call UsEmail UsChat on LINE Contact Us About This Product

Product Description

The 51216 is an NSK thrust ball bearing from the single-direction 51216 series, standard flat-seat type: 80 mm shaft-washer bore, 115 mm housing-washer outer diameter, 28 mm height. Basic dynamic load rating Ca is 79 kN and basic static load rating C0a is 218 kN (NSK official catalog CAT. No. E1103d). Thrust ball bearings carry pure axial load in one direction only — no radial capacity — and are common in worm-gear reducers, screw jacks and valve actuator shafts where low-speed axial thrust must be supported.

Inquiries & customization

Add this part number to your inquiry list — Nahshon is NSK's distributor in Taiwan and works directly with the factory to confirm specifications, stock and pricing.

Product Specifications

Specification	Unit	51216
Series	-	51216 series (single direction, flat seat)
Shaft washer bore d	mm	80
Housing washer OD D	mm	115
Height T	mm	28
Min. chamfer r	mm	1
Seat type	-	Flat seat
Basic dynamic load rating Ca	kN	79
Basic static load rating C0a	kN	218
Limiting speed (grease)	min⁻¹	1800
Limiting speed (oil)	min⁻¹	2600

FAQ

What's the difference between the Z, ZZ and DDU suffixes?

Z means a single-side steel shield, ZZ means steel shields on both sides, and DDU means contact rubber seals on both sides. Shields suit general environments and high speeds; rubber seals give better dust and water protection with slightly higher friction torque — choose based on your dust exposure and lubrication method.

When should I choose C3 clearance instead of standard clearance?

For motors or other applications with noticeable temperature rise, or high-speed operation, the inner ring expands from heat and reduces the clearance — choose C3 in that case. Standard clearance is fine for general room-temperature, low-speed use. See Nahshon's technical resources for a clearance selection guide.

Is 51216 in stock in Taiwan? What is the lead time?

Nahshon is the NSK distributor in Taiwan and keeps stock of some commonly used items. Add 51216 to your inquiry list or give us a call, and we'll confirm stock, lead time and quote.

Series Models

Thrust Bearings・51216 series (single direction, flat seat)

51206 51207 51208 51209 51210 51211 51212 51213 51214 5121551216（This page）51217 51218 51220 51305 51306 51307 51308 51309 51310 51311

View All Thrust Bearings Models →