L
o
a
d
i
n
g
.
.
.

Product Series of Automation-Related Precision Ball Screws and Linear Rails – High-Precision Ball Screws

NSK Bearings Deep Groove Ball Bearings 6009VV(DDU)

Product Overview

L
o
a
d
i
n
g
.
.
.

Deep Groove Ball Bearings/Bearings

6009VV(DDU)

Deep Groove Ball Bearing

NSK Distributor Taiwan

Bore d45 mm
Width B16 mm

Product Features

NSK deep groove ball bearing (6009 series), model 6009VV(DDU): 45 mm bore, 75 mm outer diameter, 16 mm width, non-contact seals (VV) or contact seals (DDU) on both sides, same envelope
Basic dynamic load rating Cr 23 kN, basic static load rating C0r 15.2 kN (NSK official catalog CAT. No. E1103d)
Limiting speed approx. 5300 min⁻¹ (grease), 12000 min⁻¹ (oil)
Simple, low-friction, high-speed design carrying radial load plus moderate bidirectional axial load — the most widely used bearing type
Nahshon is NSK's distributor in Taiwan — add the part number to your inquiry list for a direct quote

Quantity

Quick Inquiry

Call Us Email Us Contact Us About This Product

Product Description

The 6009VV(DDU) is an NSK deep groove ball bearing from the 6009 series: 45 mm bore, 75 mm outer diameter, 16 mm width, non-contact seals (VV) or contact seals (DDU) on both sides, same envelope. Basic dynamic load rating Cr is 23 kN and basic static load rating C0r is 15.2 kN (NSK official catalog CAT. No. E1103d). Deep groove ball bearings are simple, low-friction and capable of high speeds while carrying both radial and moderate bidirectional axial loads — the most widely used bearing type, common in motors, gear reducers, pumps, fans and general machinery.

Inquiries & customization

Add this part number to your inquiry list — Nahshon is NSK's distributor in Taiwan and works directly with the factory to confirm specifications, stock and pricing.

Product Specifications

Specification	Unit	6009VV(DDU)
Series	-	6009 series
Bore d	mm	45
Outer diameter D	mm	75
Width B	mm	16
Min. chamfer r	mm	1
Seal / shield	-	non-contact seals (VV) or contact seals (DDU) on both sides, same envelope
Basic dynamic load rating Cr	kN	23
Basic static load rating C0r	kN	15.2
Limiting speed (grease)	min⁻¹	5300
Limiting speed (oil)	min⁻¹	12000

FAQ

What's the difference between the Z, ZZ and DDU suffixes?

Z means a single-side steel shield, ZZ means steel shields on both sides, and DDU means contact rubber seals on both sides. Shields suit general environments and high speeds; rubber seals give better dust and water protection with slightly higher friction torque — choose based on your dust exposure and lubrication method.

When should I choose C3 clearance instead of standard clearance?

For motors or other applications with noticeable temperature rise, or high-speed operation, the inner ring expands from heat and reduces the clearance — choose C3 in that case. Standard clearance is fine for general room-temperature, low-speed use. See Nahshon's technical resources for a clearance selection guide.

Is 6009VV(DDU) in stock in Taiwan? What is the lead time?

Nahshon is the NSK distributor in Taiwan and keeps stock of some commonly used items. Add 6009VV(DDU) to your inquiry list or give us a call, and we'll confirm stock, lead time and quote.

Series Models

Deep Groove Ball Bearings・6009 series

6007VV(DDU)6007Z 6007ZZ 6008 6008V(DU)6008VV(DDU)6008Z 6008ZZ 6009 6009V(DU)6009VV(DDU)（This page）6009Z 6009ZZ 6010 6010V(DU)6010VV(DDU)6010Z 6010ZZ 6011 6011V(DU)6011VV(DDU)

View All Deep Groove Ball Bearings Models →