L
o
a
d
i
n
g
.
.
.

Product Series of Automation-Related Precision Ball Screws and Linear Rails – High-Precision Ball Screws

NSK Bearings Deep Groove Ball Bearings 6016Z

Product Overview

L
o
a
d
i
n
g
.
.
.

Deep Groove Ball Bearings/Bearings

6016Z

Deep Groove Ball Bearing

NSK Distributor Taiwan

Bore d80 mm
Width B22 mm

Product Features

NSK deep groove ball bearing (6016 series), model 6016Z: 80 mm bore, 125 mm outer diameter, 22 mm width, steel shield on one side (Z)
Basic dynamic load rating Cr 52.5 kN, basic static load rating C0r 40 kN (NSK official catalog CAT. No. E1103d)
Limiting speed approx. 3200 min⁻¹ (grease), 7100 min⁻¹ (oil)
Simple, low-friction, high-speed design carrying radial load plus moderate bidirectional axial load — the most widely used bearing type
Nahshon is NSK's distributor in Taiwan — add the part number to your inquiry list for a direct quote

Quantity

Quick Inquiry

Call Us Email Us Contact Us About This Product

Product Description

The 6016Z is an NSK deep groove ball bearing from the 6016 series: 80 mm bore, 125 mm outer diameter, 22 mm width, steel shield on one side (Z). Basic dynamic load rating Cr is 52.5 kN and basic static load rating C0r is 40 kN (NSK official catalog CAT. No. E1103d). Deep groove ball bearings are simple, low-friction and capable of high speeds while carrying both radial and moderate bidirectional axial loads — the most widely used bearing type, common in motors, gear reducers, pumps, fans and general machinery.

Inquiries & customization

Add this part number to your inquiry list — Nahshon is NSK's distributor in Taiwan and works directly with the factory to confirm specifications, stock and pricing.

Product Specifications

Specification	Unit	6016Z
Series	-	6016 series
Bore d	mm	80
Outer diameter D	mm	125
Width B	mm	22
Min. chamfer r	mm	1.1
Seal / shield	-	steel shield on one side (Z)
Basic dynamic load rating Cr	kN	52.5
Basic static load rating C0r	kN	40
Limiting speed (grease)	min⁻¹	3200
Limiting speed (oil)	min⁻¹	7100

FAQ

What's the difference between the Z, ZZ and DDU suffixes?

Z means a single-side steel shield, ZZ means steel shields on both sides, and DDU means contact rubber seals on both sides. Shields suit general environments and high speeds; rubber seals give better dust and water protection with slightly higher friction torque — choose based on your dust exposure and lubrication method.

When should I choose C3 clearance instead of standard clearance?

For motors or other applications with noticeable temperature rise, or high-speed operation, the inner ring expands from heat and reduces the clearance — choose C3 in that case. Standard clearance is fine for general room-temperature, low-speed use. See Nahshon's technical resources for a clearance selection guide.

Is 6016Z in stock in Taiwan? What is the lead time?

Nahshon is the NSK distributor in Taiwan and keeps stock of some commonly used items. Add 6016Z to your inquiry list or give us a call, and we'll confirm stock, lead time and quote.

Series Models

Deep Groove Ball Bearings・6016 series

6013 6013Z 6013ZZ 6014 6014Z 6014ZZ 6015 6015Z 6015ZZ 60166016Z（This page）6016ZZ 6017 6017Z 6017ZZ 6018 6018Z 6018ZZ 6019 6019Z

View All Deep Groove Ball Bearings Models →