L
o
a
d
i
n
g
.
.
.

mechonics AG (Munich, Germany) has specialized in stick-slip piezo inertia positioning for over two decades: nanometre steps accumulate into millimetre-range travel, with self-locking position hold at zero power and no heat. Ideal where space is tight, in vacuum (UHV editions) and cryogenic setups, or wherever position must hold through power-off. Product lines: MS/ML/DS miniature linear stages (3.5–30 mm travel, XY/XYZ stackable), MK single-mode fiber couplers, CU/CF/CH drive controllers and NOVA multi-axis controllers. Nahshon is the mechonics distributor for Taiwan.

mechonics Linear Positioners Low temperature stages ML.017.0560

Product Overview

L
o
a
d
i
n
g
.
.
.

Low temperature stages/Linear Positioners

ML.017.0560

ML17 - 5mm travel

mechonics Distributor Asia

Travel5 mm
Velocity1 mm/s
Mass25 g

Product Features

For ultra-low temperatures down to 4 K
5 mm travel on a 17 x 32 mm footprint
For high vacuum conditions up to 10^-6 mbar
Very compact design, only 25 g
Driven by the NDEF3 low-temperature module

Quantity

Quick Inquiry

Call Us Email Us Contact Us About This Product

Product Description

The ML17 is a miniature piezo inertial drive translation stage designed for ultra-low temperatures. It operates between 4 K and 300 K and is suitable for high vacuum conditions up to 10^-6 mbar, making it a typical choice for positioning samples or optics inside cryostats.

The stage provides 5 mm of travel on a footprint of only 17 x 32 mm, with a height of 8 mm and a mass of 25 g. The maximum velocity is about 1 mm/s. The higher drive voltage required at low temperatures (38 to 80 V) is supplied by the dedicated NDEF3 drive module; the step size depends on temperature and voltage.

Product Specifications

Specification	Unit	ML17 - 5mm travel
Travel	mm	5
Operating temperature	K	4 to 300
Vacuum compatibility	mbar	up to 10^-6
Velocity	mm/s	1
Blocking force (Fx)	N	1
Yaw / pitch angle	arcsec	20 / 60
Dimensions (W x D x H)	mm	17 x 32 x 8
Mass	g	25

FAQ

How do I choose between precision grades C3, C5 and C7?

For measurement and machining equipment that need high positioning accuracy, choose the ground-finish C3/C5 grades; for general material handling and automation mechanisms, the rolled-finish C7 grade is sufficient and offers a cost and lead-time advantage.

Can the shaft ends be custom-machined?

Yes. Nahshon offers custom shaft-end machining for NSK ball screws, completing shaft-end turning and heat treatment to your drawings, saving you the in-house machining step.

How do I confirm pricing and lead time for ML.017.0560?

Nahshon is the NSK distributor in Taiwan. Add ML.017.0560 to your inquiry list along with your stroke, load and operating conditions, and we'll confirm the specification, quote and lead time.