L
o
a
d
i
n
g
.
.
.
NSK Banner
Product Series of Automation-Related Precision Ball Screws and Linear Rails – High-Precision Ball Screws
L
o
a
d
i
n
g
.
.
.
Product image_1
Support Units & Accessories/Ball Screw

NSK GRS LG2

NSK Distributor Taiwan
  • Consistency199

Product Features

  • NSK grease LG2 for ball screws and linear guides - Low-dust grease for cleanrooms (dust emission equal to or lower than fluorine greases)
  • Base oil kinematic viscosity 32 mm²/s (40°C), operating range -20~+70 °C
  • 80 g bellows tube (Blue), attaches to the NSK hand grease pump

Quantity

Product Description

NSK Grease LG2 (ordering code NSK GRS LG2) is a grease dedicated to NSK linear products (ball screws, linear guides, Monocarrier): Lithium soap base thickener, base oil viscosity 32 mm²/s at 40°C, consistency 199, dropping point 201 °C, operating range -20~+70 °C. Use: Low-dust grease for cleanrooms (dust emission equal to or lower than fluorine greases); for normal-temperature cleanroom use, not usable in vacuum.

Supplied in an 80 g bellows tube (Blue) that clips straight onto the NSK hand grease pump. Unopened tubes contain a small amount of air - pump it out before use.

Other greases and the grease pump

NSK GRS AS2, NSK GRS PS2, NSK GRS LR3, NSK GRS LGU, NSK HGP

Complete-Set Selection

We recommend quoting support units and lock nuts together with your ball screw: include the screw part number (or shaft diameter) in your inquiry and Nahshon will match fixed- and support-side units and lock nuts per the official NSK shaft-end tables (E3162 B27–B30) — one quotation, one complete delivery.

Product Specifications
SpecificationUnitNSK GRS LG2
Product-NSK Grease LG2
Thickener-Lithium soap base
Base oil-Mineral oil + synthetic hydrocarbon oil
Base oil kinematic viscosity (40°C)mm²/s32
Consistency-199
Dropping point°C201
Operating temperature range°C-20~+70
Use-Low-dust grease for cleanrooms (dust emission equal to or lower than fluorine greases); for normal-temperature cleanroom use, not usable in vacuum
Packaging-80 g bellows tube (Blue), attaches directly to the NSK hand grease pump
Ordering code-NSK GRS LG2
Source-NSK CAT. No. E3162 D13-D19 (attached PDF)
Related Files
  • NSK E3162 潤滑脂與注脂泵(B401・D13–D20)Download
FAQ
How do I choose between precision grades C3, C5 and C7?
For measurement and machining equipment that need high positioning accuracy, choose the ground-finish C3/C5 grades; for general material handling and automation mechanisms, the rolled-finish C7 grade is sufficient and offers a cost and lead-time advantage.
Can the shaft ends be custom-machined?
Yes. Nahshon offers custom shaft-end machining for NSK ball screws, completing shaft-end turning and heat treatment to your drawings, saving you the in-house machining step.
How do I confirm pricing and lead time for NSK GRS LG2?
Nahshon is the NSK distributor in Taiwan. Add NSK GRS LG2 to your inquiry list along with your stroke, load and operating conditions, and we'll confirm the specification, quote and lead time.
Nahshon Logo

Copyright©2026 NAHSHON ENTERPRISE .All Rights Reserved.

Design by Sowing