L
o
a
d
i
n
g
.
.
.

mechonics AG (Munich, Germany) has specialized in stick-slip piezo inertia positioning for over two decades: nanometre steps accumulate into millimetre-range travel, with self-locking position hold at zero power and no heat. Ideal where space is tight, in vacuum (UHV editions) and cryogenic setups, or wherever position must hold through power-off. Product lines: MS/ML/DS miniature linear stages (3.5–30 mm travel, XY/XYZ stackable), MK single-mode fiber couplers, CU/CF/CH drive controllers and NOVA multi-axis controllers. Nahshon is the mechonics distributor for Taiwan.

mechonics Linear Positioners Micro stages 1-dim MS.038.0800

Product Overview

L
o
a
d
i
n
g
.
.
.

Micro stages 1-dim/Linear Positioners

MS.038.0800

MS38 - 8mm travel

mechonics Distributor Asia

Travel8 mm
Mass32 g
Velocity1.5 mm/s

Product Features

8 mm travel at a 38 x 42 mm footprint
Free aperture of 10 mm for ray passage
Special design for optical systems
Only 9.5 mm height, 32 g mass

Quantity

Quick Inquiry

Call Us Email Us Contact Us About This Product

Product Description

The MS38 is a miniature piezo inertial drive translation stage specially designed for optical systems. A free aperture of 10 mm in the center of the stage allows the beam to pass straight through, making it ideal for precise positioning of lenses, apertures and filters.

The stage provides 8 mm of travel on a 38 x 40 mm footprint with a height of only 9.5 mm. The maximum velocity is 1.5 mm/s and the bearing force (Fy, Fz) is 20 N, with a yaw angle of 20 arcsec and a pitch angle of 60 arcsec. Vacuum and UHV editions are available.

Product Specifications

Specification	Unit	MS38 - 8mm travel
Travel	mm	8
Free aperture	mm	10
Dimensions (W x D x H)	mm	38 x 40 x 9.5
Mass	g	32
Velocity	mm/s	1.5
Blocking force (Fx)	N	4.5
Bearing force (Fy, Fz)	N	20
Yaw / pitch angle	arcsec	20 / 60

FAQ

How do I choose between precision grades C3, C5 and C7?

For measurement and machining equipment that need high positioning accuracy, choose the ground-finish C3/C5 grades; for general material handling and automation mechanisms, the rolled-finish C7 grade is sufficient and offers a cost and lead-time advantage.

Can the shaft ends be custom-machined?

Yes. Nahshon offers custom shaft-end machining for NSK ball screws, completing shaft-end turning and heat treatment to your drawings, saving you the in-house machining step.

How do I confirm pricing and lead time for MS.038.0800?

Nahshon is the NSK distributor in Taiwan. Add MS.038.0800 to your inquiry list along with your stroke, load and operating conditions, and we'll confirm the specification, quote and lead time.

Series Models

Micro stages 1-dim

DS.040.1100 DSP.050.1006 MS.015.0400 MS.030.3000MS.038.0800（This page）

View All Micro stages 1-dim Models →